how do i reset my ford focus immobiliser
Insert the key into the ignition and turn it to the on position, which activates your accessories but not the engine. Leave the key in position for about 10 – 15 minutes. Step 3: Check the anti-theft light again. If it’s no longer blinking, turn the key back to the Off position and allow it to set for a minute or two.Next, insert your key to power the engine, and leave the key there for at least 10-15 minutes. The last step is to recheck the anti-theft light, whether it is blinking or not. If the light has gone off, turn the key off, and let it be like that for another 2-3 minutes. Try to restart again; the ignition should work. Quick Demo Of How The Autowatch GHOST Immobiliser Works On A 2018 Ford Focus RS MK3. Prevent Keyless Entry Theft! In today's video and part of our recent upl
Perimeter alarm is automatically activated as soon as car is locked so no way to deactivate. Only thing you can turn off are interior sensors ( if fitted) via settings menu. As already suggested sounds like sensor fault. Thanks, i've disabled this now so fingers crossed it's just an internal sensor that's playing up.To complete the body control module reset, you will have to reconnect the battery. This reestablishes the electrical supply through the BCM as well as other electrical peripherals of the vehicle. Once the battery is reconnected, check if the problems that made you perform the body control reset have been rectified. The security light on your dashboard—also known as the anti-theft light—indicates the status of your car’s anti-theft system. Flashing security indicator light: In some cars, the security indicator light flashes while the ignition switch is in OFF, LOCK, or ACC to show that the immobilizer and car alarm systems are active.
If the electronic immobiliser device does not recognise the key and lock the engine supply systen can I reset the code without taken it to a dealer (Car type Citrion C5) Submitted: 14 years ago. Category: UK Car
With AU series 1 or some low spec later vehicles: 1. With the ignition on and all accessories off leave the key in the lock in the run or on position for 61 minutes and until all the door locks cycle twice. 2. Then switch the key off and remove it for 30 seconds before testing to see if the car will start as normal.